-
Who this checklist is for (and the $185K that got me here)
-
Step 1: Confirm the manufacturing country before the quote goes out
-
Step 2: Verify the dealer is authorized (this is where Maxeon warranties die)
-
Step 3: Compare warranties, not just efficiency numbers
-
Step 4: Match storage capacity to usable energy — not nameplate
-
Step 5: Decide solar battery vs generator by use case, not by price
-
Step 6: Price the total ownership cost, not the unit cost
-
Things that will still bite you (the notes section)
Who this checklist is for (and the $185K that got me here)
I've been handling solar procurement for a mid-sized EPC for 9 years. I've personally made 4 significant (and documented) mistakes, totaling roughly $185,000 in wasted budget.
Now I maintain our team's pre-order checklist so nobody else repeats my errors. What's below is the short version — the one I actually send to new hires. Not theory. Not a vendor's generic "buyer's guide." Just the steps that have caught real problems.
If you're buying modules (Maxeon, Longi Hi-MO X10, or anything else) and you're sizing storage (a solar battery vs a generator vs a 5kWh solar generator), these 6 steps will catch most of what I got wrong. Six steps. Twenty minutes. That's it.
Step 1: Confirm the manufacturing country before the quote goes out
Maxeon modules aren't all made in the same place. As of my last check (Q1 2024), the primary assembly locations are Malaysia (Melaka) and Mexico (Mexicali), with a France facility announced but not something I'd trust a delivery date on until a distributor confirms it in writing. Your distributor will know the actual build for the specific SKU and batch.
Verify two things: (1) the country of assembly for that SKU, and (2) that the serial numbers on the delivered panels match. Don't take "Made in [Country]" on the quote sheet — that's copy-paste, not fact.
I learned this the hard way in March 2022. A 120-panel commercial job. The quote sheet said "Maxeon — Made in USA" (the sales rep typed it in). The panels arrived from Malaysia. Not a technical problem, except the customer's contract had a "US-origin" clause, and we had to renegotiate a $6,000 discount. Two weeks of embarrassment for something that was avoidable with one email.
Checkpoint: Ask for a photo of the carton label for the specific batch before approval. If they won't send one, that's information.
Step 2: Verify the dealer is authorized (this is where Maxeon warranties die)
"Where to buy Maxeon solar panels" is a real question with a real trap. Maxeon only honors full warranty claims through authorized distributors and certified installers. Buy from a marketplace or a grey-market seller and you're on your own.
In 2019, I bought 40 Maxeon panels from a third-party marketplace. Roughly 12% discount off our usual distributor. One panel arrived with a micro-crack on the backsheet. Maxeon's claim line told me the panel wasn't purchased through an authorized channel — warranty void. Total damage: about $1,000 in replacement cost and one very awkward conversation.
Checkpoint: Look the seller up on Maxeon's official dealer locator before you send payment. If they're not listed, get their explanation in writing. "We source from authorized partners" is not the same as "we are authorized."
Step 3: Compare warranties, not just efficiency numbers
The Longi Hi-MO X10 vs Maxeon comparison comes up constantly, so let me address it with numbers. Both are solid modules. Fair warning: I'm not going to pretend one is garbage.
- Maxeon: 40-year linear power warranty on its premium product lines. That's unusual — most of the industry sits at 25–30 years.
- Longi Hi-MO X10: Around 25 years linear power warranty depending on the specific SKU (ask the distributor for the current spec sheet — don't quote me on the last decimal). Efficiency is in the same high range as premium IBC modules, and the HPBC architecture performs well.
The efficiency spread between premium modules is maybe 1–2 percentage points. The warranty spread between a 40-year and a 25-year product is 15 years of financial coverage. That's a different order of magnitude.
The mistake I made here was in 2020. We picked a 25-year-warranty module for a commercial rooftop because it was cheaper per watt. In year 3, two panels failed. The warranty covered the panel. It did not cover the crane, the scaffolding, and the labor — about $4,200 in soft costs. We'd saved roughly $800 on the module price. Net loss: $3,400, before counting the client relationship damage.
Checkpoint: Read the warranty terms, not the number. Does it cover labor? Decommissioning? Is the payout pro-rated or full replacement? The headline "25 years" tells you almost nothing on its own.
Step 4: Match storage capacity to usable energy — not nameplate
This step is where the 5kWh solar generator question usually blows up. I want to spell it out because I got hit on it once and it was a $1,400 lesson.
Nameplate capacity ≠ usable capacity. Most portable solar generators (EcoFlow, Bluetti, Anker SOLIX, etc.) have a usable fraction of roughly 85–90% of the nameplate — the BMS protects the cells by keeping them from full discharge. So a "5kWh" generator realistically gives you about 4.2–4.5kWh before it shuts down. If you're cycling to 60% DoD continuously, expect closer to 3kWh of actual usable energy in normal operation.
Second trap: continuous output vs peak output. A unit labeled "5,000W peak" might have a continuous inverter rating of 2,500–3,000W. Push it past that and it either derates or trips.
My 2023 disaster: I sized storage for a remote telecom site on nameplate capacity. Assumed 8 hours of runtime on a "5kWh" system for the load profile. Actual runtime: 4.5 hours before the inverter derated and the load tripped. We had to add a supplementary battery pack — $1,400, plus a 6-week delay because the compatible pack was back-ordered. If I'd asked for the derating curve before ordering, I'd have caught it.
Checkpoint: Before you buy any portable solar generator, ask: "What is the continuous inverter output, and what is the usable kWh at 60% DoD?" If the spec sheet won't commit to those two numbers, slow down.
Step 5: Decide solar battery vs generator by use case, not by price
The "solar battery vs generator" decision is not really a price comparison. It's a use-case comparison that happens to have different price tags. This worked for us in the mid-sized EPC context — if you're a one-person installer or a utility-scale buyer, the math will look different.
- Solar battery (wall-mounted, grid-tied or hybrid): Good for self-consumption, whole-home backup, and anything that needs to be automatic. Requires an electrician and permitting. Typically 10–15 year lifespan. Installed cost generally sits in the $400–700/kWh range, depending on the market.
- Portable solar generator: Good for off-grid cabins, job sites, renters, and anything that needs to be moved. No permitting. Typically 5–8 year lifespan. Sticker price tends to run $700–1,200/kWh — the higher number is the trade-off for zero install work.
Where people get this wrong is assuming the cheaper unit will do the more expensive unit's job. In 2021, we quoted a customer a 5kWh portable generator for home backup "because it's cheaper." Six months later they wanted it to automatically run the house. It can't. It isn't wired for that. The replacement — a proper hybrid battery with an installed transfer switch — came in around $11,000, against the $9,000 they could have spent on the right system up front. That's a $2,000 penalty for one wrong assumption.
Checkpoint: Ask the customer one question before recommending anything: "When the grid goes down, do you want to flip a switch, or do you want it to just happen?" If the answer is "just happen," the portable generator is off the list regardless of price.
Step 6: Price the total ownership cost, not the unit cost
This is the part of the job most of my early mistakes came from. The lowest quote is rarely the lowest cost once you add everything up. And when you're under project pressure, "save $5K on the module order" feels like a win right up until the schedule slips and the penalty clauses kick in.
Here's the running list I use when comparing two quotes. Both sides get the same table.
- Module price (per W, not per panel)
- Inverter compatibility (some inverters only take certain roof profiles)
- Installation labor and scaffolding
- Permitting and interconnection fees
- Storage (battery or generator) and its install cost
- Delivery lead time, and the cost of missing it
- Warranty soft costs (labor, crane, disposal)
In 2022 I chose the marginally cheaper module shipment with a 4-week longer lead time. The project schedule was tight. We missed the client's deadline, ate a penalty, and paid for a temporary rental solution on site. Net: $16,000 overrun to save about $5,000 on the order. One bad line in a spreadsheet.
I get why people shop on price — budgets are real, and procurement gets judged on savings. But the savings number on the PO is not the savings number on the project. Those are two different figures, and only one of them survives to the end of the job.
Checkpoint: Put both quotes into the same table, unit-normalized. If a supplier won't break out their "all-in" number, that's the supplier to slow down on.
Things that will still bite you (the notes section)
- Grey-market Maxeon panels void the warranty. No exceptions I've found. Not worth the discount.
- Nameplate 5kWh ≠ usable 5kWh. The gap is bigger than most buyers assume. Ask for the 60% DoD number in writing.
- "Made in [Country]" on the quote is marketing copy. The carton label is the fact. Get a photo.
- Warranty years ≠ warranty coverage. Soft costs — labor, crane, disposal — often fall outside the claim. Those can dwarf the panel price.
- Battery vs generator is a use-case call. Automatic backup is a battery. Portable anything is a generator. Don't mix them.
- Efficiency differences of 1–2 points rarely outweigh a 15-year warranty gap. When the numbers are close on efficiency, look at coverage. That's where the real gap is.
None of this is exotic. I made every mistake on this list, which is the whole reason I wrote it down. Run the six steps before you send the next PO. The 20 minutes is cheaper than the lesson.